For fine ceramic products such as Transfer End Effector / Handling Arm and Porous Chuck
made in Japan
＜Telephone quotations/inquiries＞
TEL+81-26-248-1626
Business hours: 9:00-17:00
(closed on Saturdays, Sundays and Holidays)
＜Telephone quotations/inquiries＞
TEL. +81-26-248-1626Business hours: 9:00-17:00 (closed on Saturdays, Sundays and Holidays)
＜Estimates and inquiries by FAX＞
FAX. +81-26-251-2160
「Wafer Transfer End Effector / Handling Arm」 list
- Search by Problem
- Search by Desired Effect
- Search by Product Type
- Deformation
- Cost
- Particles
- Conductivity
- Suction Marks
- Static Electricity
- 大型偏光フィルムの吸着
- Warped Wafer
- Productivity (Throughput)
- Impurities
- Sparking
- Wafer Scratching
- Part Replacement Time
- Outgassing
- Surface Resistance
- Wafer Sticking
- Reflectance
- Air-Permeability
- Lint adhesion
- Misalignment
- Clogging
- Plasma Resistance
- Yield
- Contact Damage
- Product Life
- Dust Emissions
- Defect Rate
- Heat Resistance
- Contamination
- Abrasion
- Functionality
- Chemical Resistance
- Corrosion Resistance
- 薄ウェハ
- Metal Contamination Control
- Wear Resistance Improvement
- Improved Functionality
- Wafer Scratch Prevention
- Anti-Static Measures
- Improved Heat Resistance
- Portability
- Warped Wafer Prevention
- Sparking Prevention
- Improved Chemical Resistance
- Improved Productivity
- Misalignment Prevention
- Reduced Defect Rate
- Improved Productivity(Improved Throughput)
- Wear Resistance
- Contact Damage Reduction
- Yield Improvement
- Man-Hour Reduction
- Surface Resistance Control
- Wear Prevention
- Particle Control
- Suction Mark Reduction
- Outgassing Reduction
- Deformation Reduction
- Improved Plasma Resistance
- Long Service Life
- ワークの傷防止
- Contamination Measures
- Cost Reduction
-
2023.08.08パワー半導体向け薄反りウエハの保持・吸着が可能な多孔質埋め込みハンドのご提案
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Wafer Scratch Prevention,Suction Mark Reduction
-
2023.03.07Proposal for a transport End Effector / Handling Arm that can suck warped wafers
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Warped Wafer Prevention,Misalignment Prevention,Improved Functionality
-
2022.12.05Reduction of defect rate of electrostatic diffusion End Effector / Handling Arm by changing coating
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Contamination Measures,Anti-Static Measures,Sparking Prevention,Reduced Defect Rate
-
2022.12.05Cost reduction by remodeling the wafer Transfer End Effector / Handling Arm -holding section to a PAD
Product Type： Wafer Transfer End Effector / Handling ArmPAD
Proposed Effect： Man-Hour Reduction,Cost Reduction,Improved Functionality,Improved Productivity,Wear Resistance
-
2022.12.05Proposal for a Transfer End Effector / Handling Arm that can use one wafer for adsorption and floating
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Man-Hour Reduction,Cost Reduction,Improved Functionality,Improved Productivity
-
2022.12.05Proposal for a portable wafer Transfer End Effector / Handling Arm
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Improved Functionality,Portability
-
2022.12.05Proposal for a transport End Effector / Handling Arm that can suck warped wafers
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Warped Wafer Prevention,Misalignment Prevention,Improved Functionality,Yield Improvement
-
2022.12.05
Reduction of contact damage by changing the material of the wafer Transfer End Effector / Handling Arm from metal to conductive ceramics
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Contact Damage Reduction,Wear Prevention,Contamination Measures
-
2022.12.05Proposal of a wafer Transfer End Effector / Handling Arm with superior electrostatic diffusion effect even at high temperatures
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Improved Functionality,Anti-Static Measures,Surface Resistance Control
-
2022.12.05
Proposal for assembly of the sensor to the wafer Transfer End Effector / Handling Arm
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Improved Productivity(Improved Throughput),Improved Functionality
-
2022.12.05
Proposing PAD surface-treatment to prevent problems with wafer sticking
Product Type： Wafer Transfer End Effector / Handling ArmPAD
Proposed Effect： Wafer Scratch Prevention,Misalignment Prevention,Contact Damage Reduction,Yield Improvement
-
2022.12.05
Proposal of End Effector / Handling Arm for warping and thin wafer transfer
Product Type： Wafer Transfer End Effector / Handling Arm
Proposed Effect： Wafer Scratch Prevention,Warped Wafer Prevention,Suction Mark Reduction,Yield Improvement,Particle Control
-
-
-
Searching for problems
- Deformation
- Cost
- Particles
- Conductivity
- Suction Marks
- Static Electricity
- 大型偏光フィルムの吸着
- Warped Wafer
- Productivity (Throughput)
- Impurities
- Sparking
- Wafer Scratching
- Part Replacement Time
- Outgassing
- Surface Resistance
- Wafer Sticking
- Reflectance
- Air-Permeability
- Lint adhesion
- Misalignment
- Clogging
- Plasma Resistance
- Yield
- Contact Damage
- Product Life
- Dust Emissions
- Defect Rate
- Heat Resistance
- Contamination
- Abrasion
- Functionality
- Chemical Resistance
- Corrosion Resistance
- 薄ウェハ
-
Look for the proposed effect
- Metal Contamination Control
- Wear Resistance Improvement
- Improved Functionality
- Wafer Scratch Prevention
- Anti-Static Measures
- Improved Heat Resistance
- Portability
- Warped Wafer Prevention
- Sparking Prevention
- Improved Chemical Resistance
- Improved Productivity
- Misalignment Prevention
- Reduced Defect Rate
- Improved Productivity(Improved Throughput)
- Wear Resistance
- Contact Damage Reduction
- Yield Improvement
- Man-Hour Reduction
- Surface Resistance Control
- Wear Prevention
- Particle Control
- Suction Mark Reduction
- Outgassing Reduction
- Deformation Reduction
- Improved Plasma Resistance
- Long Service Life
- ワークの傷防止
- Contamination Measures
- Cost Reduction
-
Search from the product type
-
EXAMPLE OF CUSTOM-MADE
-
PRODUCTS AND SERVICES
-
Latest technology column
-
CONTENT
-
Frequently Asked Questions
Common questions from
the Ceramics Design Lab -
Available Material / Size / Product
Please see our wide range of
services -
Equipment owned
Our processing and
inspection facilities -
Company profile
Ceramics Design Lab is
operated by Asuzac Co., Ltd.
CONTACT
The quotation and inquiries are available by the telephone /FAX or the mail .
TEL. +81-26-248-1626
FAX. +81-26-251-2160
